Gas stations are far more than just the pumps you see and the shops that go with them. There are the large tanks and the pipes from them. This is buried under the ground so it is impossible to go down there and check on the status of the fuel flow. It is easier to tell at the pumps but all of these systems need to work in harmony in order to have the best efficiency.
Stations that function the best maintain proper fuel flow by using meters at all the right points. This way, you can tell how much fuel is coming through a valve and how fast it is coming through. It is important to have the best fuel meters texas can offer in order to be sure the fuel flowing from tanks matches what was put in.
When the numbers do not add up, this usually means there is a problem such as a leak. It is vital that such issues be addressed immediately, even if the discrepancy is only small. You have the initial measurement from the supplier and then you have the meters measuring how much is actively being used. The difference between the two should be even.
If leaks are happening, one of the first indicators will be a major discrepancy in the measurements. With this event, it is important to have a good service available to inspect, find the cause, and to do the repairs.
At the pumps themselves, fuel meters need to be very accurate. This is the point of sale and it ties into the rest of the system. With the proper systems in place, less fuel will be lost due to evaporation. Depending on the system, there will be different allowances for this. Make sure your fuel systems are metered as good as they can be.